background image

20

m

Manufacturer’s storage recommendations should

be strictly complied with.

m

Ice lollies can cause frost burns if consumed

straight away from the freezer.

m

Do not use electrical appliances inside the frid-

ge/freezer.

m

Do not place carbonate or fizzy drinks in the

freezer as these may explode.

m

Whenever you discard and old freezer make

sure to:

m

Take off the doors in order to prevent chil-
dren being trapped inside.

Have the gas R600a from the cooling system
removed by an authorised person before
making it into scrap metal.

m

Safety instructions

Warnings for your safety. Carefully read
these instructions before installing and
using the machine

m

This appliance is designed to be operated by adults

only. Children should not be allowed to tamper with
the controls or play with the product.

m

Any electrical work required to install the appliance

should be carried out by a qualified electrician or
competent person.

m

This appliance is heavy. Care should be taken when

moving it.

m

Maker sure that the cable is not trapped underneath

the appliance, nor touches the motor.

m

Repairs carried out by inexperienced persons may

cause injuries or serious malfunctioning. Refer to
the TECHNICAL OFICIAL SERVICE.

m

The appliance should be left for at least 4 hours

after installation before it is turned on in order to
allow the refrigerant to settle.

m

This product must only be serviced by an authorized

Technical Oficial Service, and only genuine SPARE
PARTS should be used.

m

Before cleaning or reparing the appliance, 

make

sure it is unplugged.

m

It is dangerous to try and alter the specifications or

modify this product in any way.

m

These domestic appliances are designed to be used

specifically for the storage and conservation of
food.

m

Frozen food must not be re-frozen once it has been

thawed out.

Summary of Contents for ZKN20/10L

















Reviews: