background image

5 cm

min.

200 cm

2

min.

200 cm

2

CAUTION!

 Refer to the installation

instructions for the installation.

DOOR REVERSIBILITY

Please refer to the separate document with
instructions on installation and door reversal.

CAUTION!

 At every stage of reversing

the door protect the floor from
scratching with a durable material.

CONTROL PANEL

1

2

4

3

2

5

2

4

2

3

2

1

7

6

1.

Fridge temperature indicator LED

2.

Freezer temperature indicator LED

3.

FastFreeze indicator

4.

Fridge compartment indicator

5.

Freezer compartment indicator

6.

ON/OFF button
Compartment selection button

7.

FastFreeze button
Temperature regulator

SWITCHING ON

1.

Insert the plug into the wall socket.

2.

Touch the ON/OFF button (

6

) if all LED

indicators are off.

SWITCHING OFF

Keep touching the ON/OFF button (

6

) for 3

seconds.

All indicators light off.

TEMPERATURE REGULATION

Before regulating the temperature, it is necessary
to select the compartment (fridge or freezer).

The upper or lower cavity is selected by the
compartment selection button (

6

).

To select the freezer compartment touch the
compartment selection button (

6

) until LED

corresponding to the lower cavity lights up.
The temperature LED indicator shows the latest set
temperature. Recommended setting is -18°C.
To select the fridge compartment touch the
compartment selection button (

6

) until LED

corresponding to the upper cavity lights up.
The temperature LED indicator shows the latest set
temperature. Recommended setting is +4°C.
To set temperature:

1.

Touch temperature regulator button (

7

).

Current temperature indicator blinks.

2.

Any time you touch the temperature regulator
button (

7

), the setting moves by one position.

When you select a temperature, the LED
corresponding to selected temperature value
blinks for a while and the setting is fixed.

The set temperature will be reached
within 24 hours. After a power failure
the set temperature remains stored.

FASTFREEZE FUNCTION

The FastFreeze function is used to perform pre-
freezing and fast freezing in sequence in the freezer
compartment. This function accelerates the freezing
of fresh food and, at the same time, protects food
products already stored in the freezer compartment
from undesirable warming.

8

Summary of Contents for ZNHN18FS1





















Reviews: