22
Electrical Connection
The oven is designed to be connected to 230-240 V (50
Hz) electricity supply.
The oven has an easily accessible terminal block which
is marked as follows:
Letter L
-
Live terminal
Letter N
-
Neutral terminal
or E
-
Earth terminal
THIS OVEN MUST BE EARTHED
The cable used to connect the oven to the electrical
supply must comply to the specifications given below.
It is necessary that you install a double pole switch
between the oven and the electricity supply (mains), with
a minimum gap of 3mm between the switch contacts
and of a type suitable for the required load in compliance
with the current rules.
The switch must not break the yellow and green earth
cable at any point.
Important
After installation and connecting, the cable must be
placed so that it cannot at any point reach a temperatu-
re of more than 60 °C above the ambient temperature.
Before the oven is connected, check that the main fuse
and the domestic installation can support the load; and
that the power supply is properly earthed.
The manufacturer disclaims any responsibility should
these safety measures not be carried out.
Technical Data
Dimensions of recess
Height
580 mm
Width
560 mm
Depth
550 mm
Dimensions of the oven cavity
Height
335 mm
Width
395 mm
Depth
400 mm
Oven capacity
53 litres
This oven must be installed by
qualified
personnel
to the relevant British Standards.
The oven must be installed according to the
instructions supplied.
Installation
Connection
Min. size
Cable / flex Fuse
via
Cable/flex
type
• Cooker
2.5 mm
2
PVC/PVC
20 A
Control
twin and
Circuit
earth
For Uk use only
For Europe use only
Min. size Cable/flex Cable / flex type
Fuse
2.5 mm
2
H07 RN-F, H05 RN-F, 15 A
H05 RR-F, H05 VV-F,
H05 V2V2-F (T90),
H05 BB-F
Heating elements rating
Oven element
1,880 W
Top element
835 W
Bottom element
1,045 W
Convection element
2,090 W
Grill element
1,795 W
Double Grill element
2,665 W
Pizza Oven Function
3,135 W
Convection Fan
30 W
Oven Light
15 W
Cooling Fan
25 W
Total Rating
3,200 W
Supply voltage (50 Hz)
230-240 V
