Clock functions
Clock functions table
Clock function
Application
Time of day
To set, change or check the time of day.
Minute Minder
To set countdown time. This function has no effect on the operation of
the appliance.
Duration
To set the cooking time of the oven.
End
To set the time of day when the oven should deactivate.
You can use the functions Duration
and End
at the same time to
set the time for how long the
appliance should operate and when
the appliance should deactivate.
This lets you activate the appliance
with a delay in time. First set the
Duration
and then the End
.
Setting the clock functions
For Duration
and End
, set an oven
function and temperature of cooking. This is not
necessary for the Minute Minder .
1. Press again and again until the indicator
for the necessary clock function starts to
flash.
2. Press or to set the time for the
necessary clock function.
The clock function operates. The display shows
the indicator for the clock function you set.
For the Minute Minder function the
display shows the time left.
3. When the time ends the indicator of the
clock function flashes and an acoustic
signal sounds. Press a button to stop the
signal.
4. Turn the knob for the oven functions and
the knob for the temperature to the off
position.
With the Duration
and End
functions, the appliance deactivates
automatically.
Cancelling the clock functions
1. Press the again and again until the
necessary function indicator flashes.
2. Press and hold .
The clock function goes out after some
seconds.
Using the accessories
WARNING!
Refer to Safety chapters.
Inserting the accessories
Wire shelf:
Push the shelf between the guide bars of the
shelf support and make sure that the feet point
down.
Deep pan:
8
www.zanussi.com
