Zanussi ZOF35511W, User Manual

•

Internally the appliance becomes hot when in operation. Do not

touch the heating elements that are in the appliance. Always

use oven gloves to remove or put in accessories or ovenware.

•

Before maintenance cut the power supply.

•

Ensure that the appliance is switched off before replacing the

lamp to avoid the possibility of electric shock.

•

Do not use a steam cleaner to clean the appliance.

•

Do not use harsh abrasive cleaners or sharp metal scrapers to

clean the glass door since they can scratch the surface, which

may result in shattering of the glass.

•

If the supply cord is damaged, it must be replaced by the

manufacturer, its Authorised Service Centre or similarly

qualified persons in order to avoid a hazard.

•

To remove the shelf supports first pull the front of the shelf

support and then the rear end away from the side walls. Install

the shelf supports in the opposite sequence.

•

The means for disconnection must be incorporated in the fixed

wiring in accordance with the wiring rules.

Safety instructions

Installation

WARNING!

Only a qualified person must install

this appliance.

• Remove all the packaging.

• Do not install or use a damaged appliance.

• Obey the installation instruction supplied

with the appliance.

• Always be careful when you move the

appliance because it is heavy. Always wear

safety gloves.

• Do not pull the appliance by the handle.

• The kitchen cabinet and the recess must

have suitable dimensions.

• Keep the minimum distance from the other

appliances and units.

• Make sure that the appliance is installed

below and adjacent safe structures.

• Parts of the appliance carry current. Close

the appliance with furniture to prevent

touching the dangerous parts.

• The sides of the appliance must stay

adjacent to appliances or to units with the

same height.

Electrical connection

WARNING!

Risk of fire and electrical shock.

• All electrical connections should be made by

a qualified electrician.

• The appliance must be earthed.

• Make sure that the electrical information on

the rating plate agrees with the power

supply. If not, contact an electrician.

• Always use a correctly installed shockproof

socket.

• Do not use multi-plug adapters and

extension cables.

• Make sure not to cause damage to the

mains plug and to the mains cable. Should

the mains cable need to be replaced, this

must be carried out by our Authorised

Service Centre.

• Do not let mains cables touch or come near

the appliance door, especially when the door

is hot.

• The shock protection of live and insulated

parts must be fastened in such a way that it

cannot be removed without tools.

3