background image

SAFETY INSTRUCTIONS

Do not insert any foreign objects into the ventilation.

Keep all ventilation clear of any draped fabric or curtains.

The appliance must not be located immediately below a mains 
socket. Do not use the appliance with a programmer, timer or 
any other device that switches the appliance on automatically. A 
fire risk exists if the appliance is covered or positioned 
incorrectly.

Caution

: Some parts of this product can become very hot and 

cause burns. Particular attention must be given when children 
or vulnerable people are present.

Do not operate this appliance for anything other than its 
intended use.

This appliance is not intended for commercial use.

This product is intended for household use only. 

Do not use 

outdoors.

This product is only intended for heating.

Warning: 

It is hazardous for anyone other than a competent 

person to carry out any service or repair operation which 
involves the removal of a cover which gives protection against 
exposure to electrical parts.

This heater is filled with a precise quantity of special oil. Repairs 
requiring opening of the oil container are only to be made by 
the manufacturer or a service agent who should be contacted if 
there is an oil leak.

When scrapping the heater, follow the regulations concerning 
the disposal of oil.

Warning: 

Children should not use this appliance. Close 

supervision is necessary when any appliances are used near 
children.

Page 5

Summary of Contents for ZOFR5003





















Reviews: