Problem
Possible cause
Remedy
The display shows an error
code that is not in this table.
There is an electrical fault.
• Deactivate the oven with
the house fuse or the safety
switch in the fuse box and
activate it again.
• If the display shows the er-
ror code again, contact the
Customer Care Depart-
ment.
The appliance is activated and
does not heat up. The fan does
not operate. The display shows
"Demo".
The demo mode is activated.
1. Deactivate the oven.
2. Press and hold the button
.
3. The first digit on the dis-
play and Demo indicator
start to blink.
4. Enter the code 2468 by
pressing the buttons or
to change the values
and press to confirm.
5. The next digit starts to
blink.
6. Demo mode deactivates
when you confirm the last
digit and the code is cor-
rect.
SERVICE DATA
If you cannot find a solution to the problem yourself,
contact your dealer or an Authorised Service
Centre.
The necessary data for the service centre is on the
rating plate. The rating plate is on the front frame of
the appliance cavity. Do not remove the rating plate
from the appliance cavity.
We recommend that you write the data here:
Model (MOD.)
.........................................
Product number (PNC)
.........................................
Serial number (S.N.)
.........................................
INSTALLATION
WARNING! Refer to Safety chapters.
24
Summary of Contents for ZOP37982XC
Page 1: ...GETTING STARTED EASY User Manual ZOP37982XC EN User Manual Oven ...
Page 29: ...29 ...
Page 30: ...30 ...
Page 31: ...31 ...