Zanussi ZOS 745, Instruction Booklet

68

Oven thermostat control
light

This light goes off when the oven heats up
to the temperature set and comes on again
every time the thermostat cuts in to stabilize
temperature.

Operating control light

It indicates that one or more of the heating
elements are turned on.

The Cooling Fan for the
Controls

This oven is provided with a cooling fan,
meant to keep the front panel, the knobs
and the oven door handle cool. This fan may
run on after the oven or grill is switched off,
until a normal temperature is reached.

Safety thermostat

In order to avoid excessive overheating due
to incorrect use of the appliance or else to a
faulty component, the oven is equipped with
a safety thermostat which cuts off the power
supply if necessary. Operation is restored
automatically when the oven temperature
decreases to normal values. Therefore, if the
thermostat cuts in because you have not
been using the appliance correctly, the oven
can be used again simply by waiting for the
appliance to cool down. If, instead, the
thermostat cuts in because of a faulty
component, you should call the Service
Department.

Electronic programmer (ZOS 865)

4

5

1

2

3

6

7

8

1.

Push button for selecting a function 

2.

Decreasing control button “ ”

3.

Increasing control button  “ ”

4.

Display

5.

“Cooking Duration” pilot lamp 

6.

“End of cooking” pilot lamp 

7.

“Minute minder”  pilot lamp 

8.

“Time of day” pilot lamp 

The oven will work only if the time
of day has been set. 

Moreover, the

oven can also be operated without any
programme.