background image

53

Guide to Use the
instructions

Safety Instructions

Step by step instructions for an
operation

Hints and Tips

)

The oven will work only if the time
of day has been set (please read
the relevant instructions).

Once the oven has been installed:

a) set the thermostat knob to “MAX”;
b) switch the oven function control knob to

conventional cooking (

);

c) allow the oven to run empty for

approximately 45 minutes;

d) open a window for ventilation.
During this time, an unpleasant odour may
be emitted. This is absolutely 

normal

, and

is caused by residues of manufacturing.
Repeat this operation for the grill and fan
cooking function.
Once this operation is carried out, let  the
oven cool down, then clean the oven cavity
with a soft cloth soaked in warm soapy
water.

When the oven is first installed

)

To open the oven door, always
catch  the handle in its central
part.

Before cooking for the first time,
carefully wash the 

oven

accessories

.

Technical assistance

z

This appliance should be serviced by an
authorized Network Service Centre, and only
genuine spare parts should be used.

z

Under no circumstances should you
attempt to repair the appliance yourself.
Repairs carried out by inexperienced
persons may cause injury or serious
malfunctioning. Refer to your local Service
Centre. Always insist on genuine spare
parts.

)

Summary of Contents for ZOU 645



















Reviews: