distance between the top of the cabinet and the
wall unit must be at least 100 mm . Ideally, how-
ever, the appliance should not be positioned
below overhanging wall units. Accurate levelling
is ensured by one or more adjustable feet at the
base of the cabinet.
Warning!
It must be possible to
disconnect the appliance from the mains
power supply; the plug must therefore be easily
accessible after installation.
A
B
min
100mm
20mm
Levelling
When placing the ap-
pliance ensure that it
stands level. This can
be achieved by two
adjustable feet at the
bottom in front.
Electrical Connection
Caution!
Any electrical work required to
install this appliance should be carried out
by a qualified electrician or competent person.
Warning!
This appliance must be earthed.
The manufacturer declines any liability
should these safety measures not be observed.
A
B
C
D
E
Important!
The wires in the mains lead are
coloured in accordance with the following code:
A
Green and Yellow:
Earth
C
Brown:
Live
D
Blue:
Neutral
As the colours of the wires in the mains lead of
this appliance may not correspond with the col-
oured markings identifying the terminals in your
plug, proceed as follows:
1.
Connect the wire coloured green and yel-
low to the terminal marked either with the
letter “E“ or by the earth symbol
or col-
oured green and yellow.
2.
Connect the wire coloured blue to the ter-
minal either marked with the letter “N“ or
coloured black.
3.
Connect the wire coloured brown to the
terminal either marked with the “L“ or col-
oured red.
4.
Check that no cut, or stray strands of wire
is present and the cord clamp
E
is secure
over the outer sheath.
5.
Make sure the electricity supply voltage is
the same as that indicated on the appliance
rating plate.
6.
Switch on the appliance.
The appliance is supplied with a 13 amp plug
fitted
B
. In the event of having to change the
12
www.zanussi.com
