GB
GENERAL
Refrigerator
is a compressor based refrigerator designed for short-term storage of chilled products.
This class "N" version of the refrigerator is intended to be used for normal domestic purposes only
in accordance with the manufacturer's instructions.
At ambient temperature of +16
o
C to + 32°C and air moisture not higher than 70 % the manufacturer
guarantees its trouble-free operation. The refrigerator complies with all current requirements for
household refrigerators and electrical devices.
The refrigerant blowing agent is environmentally friendly - it has no ozone layer depleting
materials.
All preventive maintenance operations and repairs should be carried out by an authorised service
engineer.
Since efforts are continually made to improve the reliability and performance of the product, minor
changes may be introduced without special notice in these instruction.
! This Instruction book contains information which will help to minimise environmental impact.
IMPORTANT NOTE
REMOVAL OF TRANSIT PACKAGING
BEFORE USING FOR THE FIRST
TIME, REMOVE BLANKING PLUG
"A",TAKE OFF ALL PACKING
PIECES ''B'', AND THEN
REPLACE IN HOLE ''C''
Preparation for use
The transport packaging is made from expanded polystyrene. Strip off the adhesive tapes from the sides,
lift the refrigerator up and remove the board.
Strip off the adhesive tapes and open the door. Remove the insert from above the door.
Slightly tilt the freezer backwards in order to keep the door closed while adjusting the feet.
It
is
very important that the appliance is properly levelled. Should you need to move the appliance, lift it from
its location to ensure the feet do not drag on the floor.
57
http://www.markabolt.hu/