Zanussi ZRG16602WV, User Manual

1. Using a screwdriver, remove the screw from

the lamp cover.

2. Detach the lamp cover in the direction of the

arrows.

3. Replace the lamp with the one that has

identical characteristics and is specifically

designed for household appliances.

4. Reassemble the lamp cover.

5. Tighten the screw to the lamp cover.

6. Connect the plug to the mains socket.

7. Open the door.

Make sure that the light switches on.

CLOSING THE DOOR
1. Clean the door gaskets.

2. If necessary, adjust the door. Refer to

"Installation".

3. If necessary, replace the defective door

gaskets. Contact the Authorised Service

Centre.

INSTALLATION

WARNING! Refer to Safety chapters.

POSITIONING
Install the appliance in a dry, well ventilated indoors

where the ambient temperature corresponds to the

climate class indicated on the rating plate of the

appliance.

Climate

class

Ambient temperature

SN

+10°C to + 32°C

N

+16°C to + 32°C

ST

+16°C to + 38°C

T

+16°C to + 43°C

Some functional problems might occur

for some types of models when

operating outside of that range. The

correct operation can only be

guaranteed within the specified

temperature range. If you have any

doubts regarding where to install the

appliance, please turn to the vendor,

to our customer service or to the

nearest Authorised Service Centre.

LEVELLING
When placing the appliance ensure that it stands

level. This can be achieved by two adjustable feet

at the bottom in front.

LOCATION

It must be possible to disconnect the

appliance from the mains power

supply; the plug must therefore be

easily accessible after installation.

The appliance should be installed well away from

sources of heat such as radiators, boilers, direct

sunlight etc. Ensure that air can circulate freely

around the back of the cabinet. To ensure best

performance, if the appliance is positioned below

an overhanging wall unit, the minimum distance

between the top of the cabinet and the wall unit

must be at least 100 mm . Ideally, however, the

appliance should not be positioned below

overhanging wall units. Accurate levelling is

ensured by one or more adjustable feet at the base

of the cabinet.

9