Zanussi ZRT 16 JBC, Instruction Book

33

General safety precautions

Keep these instructions and they should remain at
the appliance when moving away or changing owner.

This appliance is designed for storing food, domestic
use and being used according to these instructions
only.

Specialised companies that are qualified to do so by
the manufacturer must carry out service and repairs
including repairing and changing the power cord.
Accessory parts supplied by them should be used
only for repairing. Otherwise the appliance can be
damaged or can cause other damage or injury.

The appliance is out of circuit only in that case if the
plug is removed from the socket. Before cleaning
and maintenance always unplug it (do not get it by the
cable). If the socket is difficult to reach, switch off the
appliance by cutting off the current.

Power cord must not be lengthened.

Make sure that the power plug is not squashed
or damaged by the back of the fridge/freezer.

- A damaged power plug may overheat and cause a

fire.

Do not place heavy articles or the fridge/freezer
itself on the power cord.

- There is a risk of a short circuit and fire.

Do not remove the power cord by pulling on its
lead, particularly when the fridge/freezer is
being pulled out of its niche.

- Damage to the cord may cause a short-circuit, fire

and/or electric shock.

- If the power cord is damaged, it must be replaced

by a certified service agent or  qualified service
personnel.

If the power plug socket is loose, do not insert
the power plug.

- There is a risk of electric shock or fire.

Without the lamp cover of interior lighting you must
not operate the appliance.

When cleaning, do not use sharp, pointed or hard
devices, as they can cause damage to the appliance.

Be careful not to allow liquids to the temperature
control and lighting box.

Do not put hot pot to the plastic parts.

Do not store flammable gas and liquid in the
appliance, because they may explode.

Check and clean the outlet of melting water coming
during defrosting regularly - a label inside the
appliance warns you for this. If it is clogged the
melting water gathered can cause earlier failure.

Precautions for child safety

Do not allow children to play with the packaging of
the appliance. Plastic foil can cause suffocation.

Adults must handle the appliance. Do not allow
children to play with it or its controlling parts.

If you are discarding the appliance pull the plug out of
the socket, cut the connection cable (as close to the
appliance as you can) and remove the door to
prevent playing children to suffer electric shock or to
close themselves into it.

Safety precautions for

installation

Put the appliance to the wall to avoid touching or
catching warm parts (compressor, condenser) to
prevent possible burn.

When moving the appliance take care of the plug not
to be in the socket.

When placing the appliance take care not to stand it
on the power cord.

Adequate air circulation should be around the
appliance, lacking this leads to overheating. To
achieve sufficient ventilation follow the instructions
relevant to installation.

Safety precautions for isobutane

Warning

The refrigerant of the appliance is isobutane (R600a)
that is inflammable and explosive to a greater extent.

Keep ventilation openings, in the appliance
enclosure or in the built-in structure, clear of
obstruction.

Do not use mechanical devices or other means to
accelerate the defrosting process, other than those
recommended by the manufacturer.

Do not damage the refrigerant circuit.

Do not use electrical appliances inside the food
storage compartments of the appliance, unless they
are of the type recommended by the manufacturer.

For the safety of life and property keep the
precautions of these user's instructions as the

manufacturer is not responsible for damages
caused by omission

.

Important safety information

GB