14
Electrical Connection
Electrical Connection
Any electrical work required to install this appli-
ance should be carried out by a qualified electri-
cian or competent person.
This appliance must be earthed.
The manufacturer declines any liability should these
safety measures not be observed.
Electrical Requirements
Before switching on, make sure the electricity supply volt-
age is the same as that indicated on the appliance rating
plate.
The appliance is supplied with a 13 amp plug fitted. In the
event of having to change the fuse in the plug supplied, a
13 amp ASTA approved (BS 1362) fuse must be used.
Should the plug need to be replaced for any reason. The
wires in the mains lead are coloured in accordance with
the following code:
Green and Yellow:
Earth
Blue:
Neutral
Brown:
Live
The wire coloured green and yellow must be connected
to the terminal marked with the letter “E“ or by the earth
symbol
or coloured green and yellow.
The wire coloured blue must be connected to the termi-
nal “N“ or coloured black.
The wire coloured brown must be connected to the ter-
minal marked “L“ or coloured red.
Upon completion there must be no cut, or stray
strands of wire present and the cord clamp must be
secure over the outer sheath.
This appliance complies with the following
E.E.C. Directives:
73/23 EEC
of 19.02.73 (Low Voltage Directive) and
subsequent modifications,
89/336 EEC
of 03.05.89 (Electromagnetic
Compatibility Directive) and subsequent modifica-
tions.
96/57 EEC
- 96/09/03 (Energy Efficiency
Directive) and its subsequent amendments
Important!
The plug must still be accessible after the appliance
has been installed.
The appliance should not be connected to the elec-
trical supply by means of an extension cable.
In case that the electrical cable has to be replaced,
please contact your local Service Force Centre.
Warning!
A cut off plug inserted into a 13 amp socket is a seri-
ous safety (shock) hazard. Ensure that it is disposed
of safely.
