Building the appliance in under a
worktop
The dimensions of the recessed installation area must
correspond with those indicated in the figure.
The appliance could be inserted between two units
(a) or as an end unit (b).
2. Fasten the appliance to the worktop or the sides,
applying the sealing strip between the refrigerator
and adjacent cabinet using the fixing brackets (E).
3. The appliance is equipped with adjustable support
feet. To adapt the appliance to the height of the
installation area (max 870 mm), screw in, or screw
out the feet situated at each bottom corner.
4. Separate parts A, B, C, D as shown in the figure.
37
t
S.I.005
S.I.004
600
550
600
600
820 - 870
b
a
The plug socket necessary for connection of the
appliance to the electricity supply should be
positioned, so that the plug is not placed in the
recess.
1. Fasten the side panel to the rear of the appliance
with the fixing brackets.
D326
SUPER.
INFER.
UPPER
LOWER
D319
E
E
SUPER.
INFER.
UPPER
LOWER
S.I.006
30
PR266
A
B
C
D
