Zanussi ZU 9144, Instruction Booklet

23

CUSTOMER SERVICE AND
SPARE PARTS

If the appliance is not functioning properly, check that:

the plug is firmly in the wall socket and the mains
power switch is on;

there is an electricity supply (find out by plugging in
another appliance);

the thermostat knob is in the correct position.

If there are water drops on the bottom of the cabinet,
check that the defrost water drain opening is not
obstructed (see "Defrosting" section).

If your appliance is still not working properly after
making the above checks, contact the nearest service
centre.

To obtain fast service, it is essential that when
you apply for it you specify the model and serial
number of your appliance which can be found on
the guarantee certificate or on the rating plate
located inside the appliance, on the bottom 

right-

hand side.

TECHNICAL SPECIFICATIONS

The technical data is indicated in the rating plate on the 

right side inside the appliance.

Height

815 mm

Width

560 mm

Depth

538 mm

lf this appliance featuring magnetic door seals is
to replace an older appliance having a spring lock
(latch) on the door or lid, be sure to make that
spring lock unusable before you discard the old
appliance. This will prevent it from becoming a
death-trap for a child.

Positioning

The appliance should be installed well away from
sources of heat such as radiators, boilers, direct
sunlight etc.
Best performance is obtained with ambient
temperature b18°C and +43°C (class T);
+18°C and +38°C (class ST); +16°C and +32°C
(class N); +10°C and +32°C (class SN).
The class of your appliance is shown on its rating
plate.

For building-in and door reversibility refer to the
relevant instructions.

INSTALLATION

t