Zanussi ZUNN18ES1, User Manual

4.5 FastFreeze function

The FastFreeze function is used to pre-freeze

and fast freeze in sequence in the freezer

compartment. This function accelerates the

freezing of fresh food and, at the same time,

protects foodstuffs already stored from

undesirable warming.

To freeze fresh food activate the

FastFreeze function at least 24 hours

before placing the food to complete pre-

freezing.

1. To activate this function press the Mode

button until the corresponding icon

appears.

The FastFreeze indicator flashes.

2. Press the OK button to confirm.

The FastFreeze indicator is shown.

This function stops automatically after 52

hours.
You can deactivate the FastFreeze function

before its automatic end by repeating the

procedure until the FastFreeze indicator turns

off or by selecting a different set temperature.

4.6 ChildLock function

Activate the ChildLock function to lock the

buttons from unintentional operation.

1. Press Mode until the corresponding icon

appears.

The ChildLock indicator flashes.

2. Press OK to confirm.

The ChildLock indicator is shown.

To deactivate the ChildLock function, repeat

the procedure until the ChildLock indicator

turns off.

4.7 DrinksChill function

The DrinksChill function is to be used to set

an acoustic alarm at the preferred time,

useful for example when a recipe requires to

cool down food products for a certain period

of time.
It is also useful when a reminder is needed in

order not to forget the bottles or cans placed

in the freezer for fast cooling.

1. Press Mode until the corresponding icon

appears.

The DrinksChill indicator flashes.

The Timer shows the set value (30 minutes)

for a few seconds.

2. Press the Timer regulator to change the

Timer set value from 1 to 90 minutes.

3. Press OK to confirm.

The DrinksChill indicator is shown.

The Timer starts to flash (min).

At the end of the countdown the "0 min"

indicator flashes and an audible alarm

sounds. Press OK to switch off the sound and

terminate the function.
To switch off the function repeat the

procedure until the DrinksChill indicator turns

off.

It is possible to change the time at any

time during the countdown and at the end

by pressing the Temperature colder

button and the Temperature warmer

button.

4.8 High temperature alarm

When there is a temperature increase in the

freezer compartment (for example due to an

earlier power failure), the alarm and freezer

temperature indicators flash and the sound is

on.

To deactivate the alarm:

1. Press any button.

The sound switches off.

2. The freezer temperature indicator shows

the highest temperature reached for a few

seconds, then the display shows the set

temperature again.

The alarm indicator continues to flash

until the normal conditions are restored.

If you do not press any button, the sound

switches off automatically after around

one hour to avoid disturbing.

4.9 Door open alarm

If the freezer door is left open for

approximately 90 seconds, the sound is on

and alarm indicator flashes.
The alarm stops after closing the door. During

the alarm, the sound can be muted by

pressing any button.

10 ENGLISH