background image

Standard guarantee conditions

We, Zanussi Limited, undertake that if within 12 months of the date of purchase this Zanussi appliance or any
part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option
repair or  replace the same FREE OF CHARGE for labour, materials or carriage on condition that:

The appliance has been correctly installed and used only on the electricity supply stated on the rating plate.

The appliance has been used for normal domestic purposes  only, and in accordance with the manufactuer's
instructions.

The appliance has not been serviced, maintained repaired, taken apart or tampered with by any person not 
authorized by us.

All service work under this guarantee must be undertaken by a Zanussi Service Force Centre.

Any appliance or defective part replaced shall become the Company's property.

This guarantee is in addition to your statutory and other legal rights.

Home visits are made between 8.30am and 5.30pm Monday to Friday. Visits may be available outside these
hours in which case a premium will be charged. 

Exclusions

This guarantee does not cover: 

Damage or calls resulting from transportation, improper use or neglect, thc replacement of any light bulbs or 
removable parts of glass or plastic.

Costs incurred for calls to put right an appliance which is improperly installed or calls to appliances outside 
the United Kingdom.

Appliances found to be in use within a commercial environment, plus those which are subject to rental 
agreements.

Products of Zanussi manufacture which are not marketed by Zanussi Limited.

European Guarantee

If you should move to another country within Europe then your guarantee moves with you to your new home
subject to the following qualifications:

The guarantee starts from the date you first purchased your product.

The guarantee is for the same period and to the same extent for labour and parts as exists in the new 
country of use for this brand or range of products.

This guarantee relates to you and cannot be transferred to another user.

Your new home is within European Community (EC) or European Free Trade Area.

The product is installed and used in accordance with our instructions and is only used domestically, i.e. a 
normal household.

The product is installed taking into account regulations in your new country.

Before you move please contact your nearest Customer Care centre, listed below, to give them details of your
new home. They will then ensure that the local Service Organisation is aware of your move and able to look
after you and your appliance.

France

Senlis

+33 (0) 44 62 29 99

Germany

Nurenberg

+49 (0) 911 323 2600

Italy

Pordenone

+39 (0) 1678 47053

Sweden

Stockholm

+46 (0) 8 738 79 50

UK

Slough

+44 (0) 1753 219897

GUARANTEE CONDITIONS

12

Summary of Contents for ZV 48 RF

















Reviews: