TROUBLESHOOTING
WARNING! Refer to Safety chapters.
WHAT TO DO IF...
Problem
Possible cause
Remedy
You cannot activate or operate
the hob.
The hob is not connected to an
electrical supply or it is con-
nected incorrectly.
Check if the hob is correctly
connected to the electrical
supply. Refer to the connection
diagram.
The fuse is blown.
Make sure that the fuse is the
cause of the malfunction. If the
fuse is blown again and again,
contact a qualified electrician.
Residual heat indicator does
not come on.
The zone is not hot because it
operated only for a short time.
If the zone operated sufficiently
long to be hot, speak to an Au-
thorised Service Centre.
IF YOU CANNOT FIND A SOLUTION...
If you cannot find a solution to the problem yourself,
contact your dealer or an Authorised Service
Centre. Give the data from the rating plate. Give
also three digit letter code for the glass ceramic (it
is in the corner of the glass surface). Make sure,
you operated the hob correctly. If not the servicing
by a service technician or dealer will not be free of
charge, also during the warranty period. The
instructions about the Service Centre and
conditions of guarantee are in the guarantee
booklet.
TECHNICAL DATA
RATING PLATE
Model ZV694MK
PNC 949 492 280 00
Typ 60 PAD 02 AO
220 - 240 V 50 - 60 Hz
Made in Romania
Ser.Nr. .................
6.5 kW
ZANUSSI
COOKING ZONES SPECIFICATION
Cooking zone
Nominal Power (Max heat setting)
[W]
Cooking zone diameter [mm]
Left front
2300
210
Left rear
1200
145
Right front
1200
145
9
