Top lamp
1. Turn the glass cover to remove it.
2. Clean the glass cover.
3. Replace the lamp with a suitable 300 °C
heat-resistant lamp.
4. Install the glass cover.
12. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
12.1 What to do if...
Problem
Check if...
You cannot activate or operate the appliance.
The appliance is correctly connected to an electrical
supply.
The appliance does not heat up.
The automatic switch-off is deactivated.
The appliance does not heat up.
The fuse is not blown.
The appliance does not heat up.
Lock is deactivated.
The lamp is turned off.
Moist Fan Baking - is activated.
The lamp does not work.
The lamp is burnt out.
The display shows 00:00.
There was a power cut. Set the time of day.
If the display shows an error code that is
not in this table, turn the house fuse off
and on to restart the appliance. If the
error code recurs contact an Authorised
Service Centre.
12.2 Service data
If you cannot find a solution to the problem
yourself, contact your dealer or an Authorised
Service Centre.
The necessary data for the service centre is
on the rating plate. The rating plate is on the
front frame of the appliance. It is visible when
you open the door. Do not remove the rating
plate from the appliance.
We recommend that you write the data
here:
Model (MOD.) :
Product number (PNC):
Serial number (S.N.):
ENGLISH 37
Summary of Contents for ZVEKN7KN
Page 79: ......
Page 80: ...867380531 A 272023...