Zanussi ZVH 66 F, User Information

18

What to do if

…

Problem

Possible cause

Remedy

The cooking zones will not switch on 
or are not functioning

More than 10 seconds have passed 
since the appliance was switched on

Switch the appliance on again.

The child safety device is switched 
on 

Deactivate the child safety device 
(See the section “Child safety de-
vice”)

Several sensor fields were touched 
at the same time

Only touch one sensor field

Automatic switch off has been trig-
gered

Remove any objects (pan, cloths, 
etc.) that are lying on the control 
panel. Switch the appliance on 
again

The lock is switched on 

Switch off the lock (See the section 
“Locking/unlocking the control pan-
el”)

Acoustic signal sounds when appli-
ance is switched off

The control panel is wholly or partly 
covered by objects.

Remove objects.

The residual heat indicator is not 
displaying anything

The cooking zone was only on for a 
short time and is therefore not hot

If the cooking zone is supposed to 
be hot, call the Customer Service 
Department.

The automatic warm up function is 
not switching itself on

There is still residual heat on the 
cooking zone 

Let the cooking zone cool down

The highest heat setting is set   

The highest heat setting has the 
same power as the automatic warm 
up function

The heat setting was set using the 
sensor field 

1.

Switching off the cooking zone

1.

Set the cooking zone using the 
sensor field 

Acoustic signal sounds and appli-
ance switches itself on and then off 
again; after 5 seconds another 
acoustic signal sounds

The On/Off sensor field has been 
covered up, e.g. by a cloth

Do not place any objects on the con-
trol panel

 is lit

Overheating protection for the cook-
ing zone has been triggered

Switch off the cooking zone. Switch 
the cooking zone on again

Automatic switch off has been trig-
gered

Switch off the cooking zone. Switch 
the cooking zone on again