- 7 -
6 Button ”Delay Start”
This button makes it possible to delay the starting of the
washing programme by 8, 4 or 2 hours. The delay you
have selected is indicated by the illumination on of the
corresponding light.
You must select this option after you have set the
programme and before you press the Start/Pause
button.
If you have already pressed the Start/Pause button and
you wish to cancel the delay time, proceed as follows:
1. Set the washing machine to Pause by pressing
the Start/Pause button.
2. Press the Delay button once, the light relevant
to the selected delay goes off.
3. Press in the Start/Pause button again.
Important!
●
The selected delay can be changed only after
selecting the washing programme again.
●
The door will be locked throughout the delay
time (door locked light lit).
The Delay start cannot be selected with ”Spin”
and ”Drain” programmes.
7 Programme progress display
When you choose the delayed start, the light relevant to
the selected delay lights up.
After the machine has started, the remaining time is
shown by the corresponding indicator light.
washing: the light comes on when the machine is
performing the washing phase (main wash). If you have
choosen the ”Pre wash” option by pressing that button,
the light will be on during the pre-wash phase too.
end: end of programme.
door: the light indicates if the door can be opened:
●
the light is lit: the door can not be opened
●
the light is out: the door can be opened
●
the light flashes: the door can soon be opened
8 Spin speed or function
With this selector you can reduce the final spin speed or
select the ”No spin” option. The speeds are applied
for the ”white-” and ”coloured” programmes.
●
The position 1300 is equivalent to 900 rpm/min for the
synthetic and wool programmes and 700 rpm/min for
the delicate wash programme.
●
The position 500 is equivalent to 500 rpm/min for the
synthetic and wool programmes and 450 rpm/ min for
the delicate wash programme.
”No spin”, by selecting this option all the spinning
phases are excluded. To be used for extremely
delicate material. The machine will add 3 extra
rinses to the cotton programmes and 1 extra rinse
to the synthetic programmes.
”Rinse Hold”, when selecting this position the water
of the last rinse is not drained to prevent the laundry
from creasing. The lights ”End” and ”Door” on the
programme progress display are lit when the pro-
gramme is finished and indicating that the water
must be drained before the door can be opened.
To drain the water:
1. Turn the programme selector to the ”Reset”
position.
2. Choose the programme ”Drain” or ”Spin” .
You can reduce the spin speed by turning the
selector.
3. Press in the Start/Pause button.
9 Programme selector
The selector is divided into 5 sections:
●
Cotton
●
Synthetic
●
Delicate
●
Wool
●
Special
programmes
Turn the programme selector clockwise or anticlockwise
to select the programme and temperature according to
the care label, or one of the special programmes.
= cold, the water is not heated
= resets, cancels the programme, switches the
machine off.
If you turn the programme selector to an other
programme when the machine is working, the
lights in the programme progress display starts
to flash. The machine will not perform the new
selected programme.
When the programme is finished, the pro-
gramme selector must be turned back to the
reset position.
Summary of Contents for ZWC 1300W
Page 1: ...INSTRUCTION BOOKLET WASHING MACHINE ZWC 1300W 822 61 16 03 ...
Page 23: ... 23 ...
Page 24: ... Electrolux plc 2004 ...
