9
4. Select the spin speed or option
or
Turn the dial to the required position.
5. Select the programme
Turn the programme selector dial
clockwise
to the
programme
K
.
6. Start the machine
Before starting up the machine check that:
●
the appliance is plugged in
●
the water supply taps are turned on
●
the drain hose is correctly and securely positioned
●
the door and the detergent dispenser drawer are
closed.
Depress the ON-OFF button: the mains-on light will
illuminate and the machine starts operating.
T0001S
ON-OFF
K
M0017a
450
550
650
750
850
1000
1200
7. At the end of the programme
The machine stops automatically.
If you have selected the RINSE HOLD option
, the
machine will stop with the water of the last rinse left in
the tub, to prevent the fabric from creasing. To drain
only, select position
or the drain programme “
S
”.
To drain and spin, select programme “
M
” or turn the
spin speed selector dial to the desired speed position: the
machine will spin at the selected speed.
The door is controlled by a safety device which releases
2 minutes after the end of the programme.
Switch the machine off by depressing the ON-OFF
button again. The mains-on light goes out.
When the programme has finished you are advised to
unplug the appliance and turn off the water taps.