Electrical connection
Voltage
Overall power
Fuse
Frequency
230-240 V
2200 W
13 A
50 Hz
Level of protection against ingress of solid particles and
moisture ensured by the protective cover, except where
the low voltage equipment has no protection against
moisture
IPX4
Water supply
1)
Cold water
Water supply pressure
2)
Minimum
Maximum
0.5 bar (0.05 MPa)
8 bar (0.8 MPa)
Maximum wash load
Cotton
7 kg
Maximum dry load
Cotton
Synthetics
4 kg
3 kg
Spin Speed
Maximum spin speed
1551 rpm
1) Connect the water inlet hose to a water tap with a 3/4'' thread.
2) The appliance works correctly if the water pressure is not lower than 0.05 MPa (0.5 bar). If you cannot
connect the water inlet hose to the cold water tap of the primary hydraulic system, connect it to your do-
mestic cold water storage system. Make sure not to exceed a distance of 5.02 m (16.5 ft) between the
appliance inlet hose and the bottom of the water storage tank.
INSTALLATION
WARNING! Refer to Safety chapters.
UNPACKING
WARNING! Remove all the packaging
and the transit bolts before installing
the appliance.
1. Use the gloves. Remove the external film. If
necessary, use a cutter.
2. Remove the cardboard top. Remove the
polystyrene packaging materials.
3. Remove the internal film.
4. Open the door. Remove the polystyrene piece
from the door seal and all the items from the
7