background image

21

Installation Instructions

Technical Specifications

It is dangerous to alter the specifications or
attempt to modify this product in any way.

Care must be taken to ensure that the appliance
does not stand on the electrical supply cable.
Any electrical work required to install this
appliance should be carried out by a qualified
electrician or competent person.

Any plumbing work required to install this
appliance should be carried out by a qualified
plumber or competent person.

DIMENSIONS Height 

85 

cm

Width 60 

cm

Depth 63 

cm

POWER SUPPLY VOLTAGE 

230-240 V/50 Hz

TOTAL POWER ABSORBED 

2050 W (10A)

WATER PRESSURE 

Minimum 

0.05 MPa (0.5 bar)

Maximum 0.8

0

MPa (8

bar)

MAXIMUM RECOMMENDED LOAD 

Cotton, linen 

6

.0 

kg

Synthetics

2,5 kg

Delicate fabrics

2,5

.

kg

Wool

2

.0 

kg

SPIN SPEED 

Maximum

Z 16 S

1400 rpm ( 

ZWF 1432 W - S

)

1600 rpm ( 

ZWF 1632 W

)

CONSUMPTION DATA FOR WASHING

Energy

1.14 kWh 

6 KG NORMALLY SOILED COTTON

Water

54 litres

ITEMS AT 60°C + 

40°AA

option selected

Time

155 minutes

This appliance complies with the following E.E.C. Directives:
- 73/23 EEC of 19.2.73 (Low Voltage Directive) and subsequent modifications;
- 89/336 EEC of 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.

Summary of Contents for ZWF 1432 S



























Reviews: