Zanussi ZWF 81260W, User Manual

If you set something incorrect, the
indicator of the button 

 flashes

red three times.

Starting a programme without the delay

start

Touch the button 

 .

• The indicator of the button 

 stops to

flash and stays on.

• The programme starts, the door locks,

the indicator 

 is on.

The drain pump can operate for a

short time at the beginning of the

washing cycle.

Starting a programme with the delay

start

The start of the programme can be delayed by

9, 6 or 3 hours.

1. Touch the button   to choose the delay

you want to set.

The indicator of the selected delay is on.
2. Touch the button 

 :

• The appliance starts the countdown.

• When the countdown is completed, the

programme starts automatically.

You can cancel or change the set of

the delay start before you touch the
button 

 . After touching the

button 

 you can only cancel the

delay.

To cancel the delay start:
1. Touch the button 

 to set the appliance

to pause.

2. Touch the button   until the indicator of

the set delay goes off.
Touch the button 

 again to start the

programme immediately.

Interrupting a programme and changing

the options

You can change only some options before they

operate.

1. Touch 

 .

The indicator of this button flashes.

2. Change the options.

3. Touch 

 again.

The programme continues.

Cancelling a programme

1. Press the button   for some seconds to

cancel the programme and to deactivate the

appliance.

2. Press the same button again to activate the

appliance. Now, you can set a new washing

programme.

The appliance does not drain the

water. The water left in a drum can

be used for the next washing cycle.

Opening the door

While a programme or the delay start operates,
the appliance door is locked. The indicator 

is on.

CAUTION!

If the temperature and level of the

water in the drum are too high, you

cannot open the door.

To open the door during the first minutes

of the cycle or when the delay start

operates:

1. Touch the button 

 to pause the

appliance.

2. Wait until the indicator 

 goes off.

3. You can open the door.
4. Close the door and touch the button 

again. The programme (or the delay start)

continues.

At the end of the programme

• The appliance stops automatically.

• The acoustic signal operates (if it is

activated).

• The indicator of the button 

 goes off.

• The door lock indicator 

 goes off.

• You can open the door.

• Remove the laundry from the appliance.

Make sure that the drum is empty.

• Press the button   for some seconds to

deactivate the appliance.

• Close the water tap.

• Keep the door and the detergent drawer

ajar, to prevent the mildew and odours.

www.zanussi.com

11