ENGLISH
39
4. Select the desired programme
Turn the programme selector dial to the desired
position.
5. Reduce eventually the spin speed or
select
(Rinse Hold) or
(No spin)
option
When selecting
option the water of the last rinse
is not emptied out, to prevent the fabrics from
creasing.
Operating sequence
Before the first wash we recommend that you pour 2
litres of water into the main wash compartment
of the detergent drawer in order to activate the ECO
valve. Then run the cotton cycle 90°C, with the
machine empty, in order to remove any
manufacturing residue from the drum and tub.
Pour half a measure of detergent into the main wash
compartment and start up the machine.
1. Place the laundry in the drum
Open the door.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible.
Close the door.
2. Measure out the detergent
Pull out the dispenser drawer until it stops. Measure
out the amount of detergent recommended by the
manufacturer in a graduated cup and pour it into the
main wash compartment
.
If you wish to carry out the prewash pour detergent
into the appropriate compartment marked
.
3. Measure out the additive
If required, pour fabric softener into the compartment
marked , without exceeding the «MAX» mark.
R0071
P0004
35.292.974.qxd 07/06/2005 18:31 Página 39