18
13. At the end of the programme
The machine stops automatically, the
START/PAUSE pilot light goes off and phase light
FIN (END) illuminates.
If the ANTI-ARRUGAS
(RINSE HOLD) option
has been selected, the phase light FIN is on and the
door is blocked to indicate that the water must be
emptied out before opening the door.
To do this first turn the programme selector dial to “
O
”
and then to drain programme
or spin programme
. The spin programme is
performed at the maximum speed. In order to avoid
any creasing or damage in synthetic, delicate and
wool items, the spin speed must be reduced by
means of the relevant spin speed selector dial.
At the end of the programme turn the programme
selector dial to “
O
” to switch the machine off.
Remove the laundry from the drum and carefully
check that the drum is empty.
If you do not intend to carry out another wash, close
the water tap. Leave the door open to prevent the
formation of mildew and unpleasant smells.
132986630_GB.qxd 10/03/2005 11:55 Pagina 18 (Nero/Process Black pellicola)