Zanussi ZWG 7102 V, User Manual

Changing the options

You can change only some options before they
operate.

1.

Press the button 

Старт

/

Пауза

. The indica-

tor flashes.

2.

Change the options.

3.

Press the button 

Старт

/

Пауза

 again. The

programme continues.

Open the door

While a programme or the delay start operates,
the appliance door is locked. The indicator 
is on.

Caution!

 If the temperature and level of

the water in the drum are too high, you

cannot open the door.

To open the appliance door when the
delay start operates:

1.

Press the button 

Старт

/

Пауза

 to set the

appliance to PAUSE.

2.

Wait until the indicator 

 goes off.

3.

You can open the door.

4.

Close the door and press the button

Старт

/

Пауза

 again. The delay start contin-

ues to operate.

To open the appliance door when the
programme operates:

1.

Turn the programme knob to 

 to deacti-

vate the appliance.

2.

Wait for some minutes and then open the
appliance door.

3.

Close the appliance door.

4.

Set the programme again.

At the end of the programme

• The appliance stops automatically.

• The acoustic signals operate.

• In the display 

 comes on.

• The indicator of the 

Старт

/

Пауза

 button goes

off.

• The door lock indicator 

 goes off.

1.

Turn the programme knob to 

 .

2.

Remove the laundry from the appliance.
Make sure that the drum is empty.

3.

Keep the door ajar, to prevent the mildew
and odours.

4.

Close the water tap.

The washing programme is completed,
but there is water in the drum:

– The drum turns regularly to prevent the crea-

ses in the laundry.

– The door lock indicator 

 is on. The door

stays locked.

– You must drain the water to open the door.

To drain the water:

1.

Set the Drain or the Spin programme.

2.

Press the

Старт

/

Пауза

 button . The appli-

ance drains the water and spins.

3.

When the programme is completed and
the door lock indicator goes off, you can
open the door

4.

Turn the programme knob to 

 to deacti-

vate the appliance.

Stand by

Some minutes after the end of the washing pro-
gramme, if you do not deactivate the appliance,
the energy saving status activates.
The energy saving status decreases the energy
consumption when the appliance is on the
standby.

• All indicators and the display go off.

• The indicator of button Start flashes slowly
Press one of the buttons to deactivate the en-
ergy saving status.

Hints and tips

The laundry load

• Divide the laundry in: white, coloured, syn-

thetics, delicates and wool.

• Obey the washing instructions that are on

the laundry care labels.

• Do not wash together white and coloured

items.

11

www.zanussi.com