4.
Cleaning the drain pump
Warning!
Do not clean the drain filter if
the water in the appliance is hot.
1.
2.
3.
4.
5.
1
2
6.
7.
8.
9.
1
2
10.
Emergency drain
Because of a malfunction, the appliance cannot
drain the water.
If this occurs, do steps (1) through (9) of 'To
clean the drain pump'.
If necessary, clean the pump.
When you drain the water with the emergency
drain procedure, you must activate again the
drain system:
1.
Put 2 litres of water in the main wash com-
partment of the detergent dispenser.
2.
Start the programme to drain the water.
Frost precautions
If the appliance is installed in an area where the
temperature can be less than 0 °C, remove the
remaining water from the inlet hose and the
drain pump.
1.
Disconnect the mains plug from the mains
socket.
2.
Close the water tap.
3.
Remove the water inlet hose
4.
Put the two ends of the inlet hose in a con-
tainer and let the water flow out of the
hose.
5.
Empty the drain pump. Refer to the emer-
gency drain procedure
14
www.zanussi.com
Summary of Contents for ZWG 7102 V
Page 1: ...EN User manual Washing Machine ZWG 7102 V ...
Page 18: ...18 www zanussi com ...
Page 19: ...19 www zanussi com ...
