Caution!
Make
sure that no
laundry stays be-
tween the seal and
the door. There is a
risk of water leakage
or damage to the
laundry.
Using detergent and additives
• Measure out the
detergent and the
fabric conditioner.
• Carefully close the
detergent drawer.
Detergent compartment for prewash
phase.
Detergent compartment for washing
phase.
Compartment for liquid additives (fabric
conditioner, starch).
Setting a programme
1.
Turn the programme knob and set the pro-
gramme:
– The indicator
flashes.
– The display shows the programme dura-
tion.
2.
If necessary, change the spin speed or add
available functions.
When you press the relevant button, the in-
dicator of the set function comes on.
Starting a programme without the delay
start
Press the Start button
:
• The indicator of the button
stops to flash
and the indicator
is on.
• The programme starts and the door locks.
• The programme time decreases with steps of
one minute.
Starting a programme with the delay start
• Press the Delay start button
again and
again until the display shows the delay you
want to set.
• Press the Start button
:
The appliance starts the countdown. The indi-
cator
goes on.
When the countdown is completed, the pro-
gramme starts automatically.
You can change or cancel the delay start
before you press the button
. After you
have pressed the button
you can only cancel
the delay.
To cancel the delay start:
1.
Press the button
to set the appliance to
PAUSE.
2.
Press thebutton
. The display shows
’
.
3.
Press the button
again to start the pro-
gramme immediately.
Interrupting a programme and changing
the options
You can change only some options before they
operate.
1.
Press the button
. The indicator flashes.
2.
Change the options.
3.
Press the button
again. The programme
continues.
Cancelling a programme
1.
Turn the programme knob to
to cancel
the programme and to deactivate the appli-
ance.
2.
Turn the programme knob again to activate
the appliance. Now, you can set a new
washing programme.
The appliance does not drain the water.
Changing the options
You can change only some options before they
operate.
1.
Press the button
. The indicator flashes.
2.
Change the options.
12
www.zanussi.com
