Zanussi ZWI 2105, User Manual

38

Something not working?

Problems which you can resolve yourself.

Problem

Possible cause

• The machine does not start up:

• The door is not firmly closed.
• The machine is not plugged in or there is no power

at the socket.

• The main fuse has blown.
• The programme selector dial is not positioned correctly

and the ON/OFF button has not been depressed.

• The machine does not fill:

• The water tap is closed.
• The inlet hose is squashed or kinked.
• The filter in the inlet hose is blocked.
• The door is not properly closed.

• The machine fills then empties

immediately:

• The end of the drain hose is too low. Refer to

relevant paragraph in “water drainage” section.

• The machine does not empty and/or

does not spin:

• The drain hose is squashed or kinked.
• The option 

has been selected.

• The laundry is not evenly distributed in the drum.
• The drain filter is clogged.

• There is water on the floor:

• Too much detergent or unsuitable detergent

(creates too much foam) has been used.

• Check whether there are any leaks from one of the

inlet hose fittings. It is not always easy to see this
as the water runs down the hose; check to see if it
is damp.

• The drain hose is damaged.

• Unsatisfactory washing results:

• Too little detergent or unsuitable detergent has

been used.

• Stubborn stains have not been treated prior to

washing.

• The correct temperature was not selected.
• Excessive laundry load.

• The machine vibrates or is noisy:

• The transit bolts and packing have not been

removed.

• The support feet have not been adjusted.
• The laundry is not evenly distributed in the drum.
• Maybe there is very little laundry in the drum.

• The door will not open:

• The programme is still running.
• The door lock has not been released.
• There is water in the drum.

132984080.qxd  09/09/2005  08:49  Pagina  38    (Nero/Process Black pellicola)