Before starting the new programme
the appliance could drain the water. In
this case, make sure that the detergent
is still in the detergent compartment, if
not fill the detergent again.
INTERRUPTING A PROGRAMME AND
CHANGING THE OPTIONS
You can change only some options before they
operate.
1.
Press the button Start/Pause.
The indicator flashes.
2.
Change the options.
3.
Press the button Start/Pause again.
The programme continues.
OPENING THE DOOR
While a programme or the Delay Start operates, the
appliance door is locked. The indicator Door is on.
CAUTION!
If the temperature and
level of the water in the drum are too
high and the drum still rotates, you
cannot open the door.
To open the door during the first minutes of the
cycle or when the Delay Start operates:
1.
Press the button Start/Pause to pause the
appliance.
2.
Wait until the indicator Door goes off.
3.
You can open the door.
4.
Close the door and touch the button Start/
Pause again. The programme (or the Delay
Start) continues.
AT THE END OF THE PROGRAMME
•
The appliance stops automatically.
•
The acoustic signal operates (if it is activated).
•
In the display comes on.
•
The indicator of the button Start/Pause goes off.
•
The door lock indicator
goes off.
Turn the programme knob to position
to
deactivate the appliance.
•
You can open the door.
•
Remove the laundry from the appliance. Make
sure that the drum is empty.
•
Close the water tap.
•
Keep the door and the detergent drawer ajar, to
prevent the mildew and odours.
The washing programme is completed, but
there is water in the drum:
•
The drum turns regularly to prevent the creases
in the laundry.
•
The indicator Rinse Hold stays on to remind you
to drain the water.
•
The door lock indicator
is on. The indicator
of button Start/Pause flashes. The door stays
locked.
•
You must drain the water to open the door.
Draining the water:
1.
To drain the water.
•
Set a Drain or a Spin programme.
•
Press the button Start/Pause. The
appliance drains the water and spins.
2.
When the programme is completed and the
door lock indicator
goes off, you can open
the door.
3.
Turn the programme knob to the position
to
deactivate the appliance.
STAND BY
Some minutes after the end of the washing
programme, if you do not deactivate the appliance,
the energy saving status activates. The energy
saving status decreases the energy consumption
when the appliance is on the standby:
•
All indicators and the display go off.
•
The indicator of button Start flashes slowly.
Press one of the buttons to deactivate the energy
saving status.
HINTS AND TIPS
THE LAUNDRY LOAD
•
Divide the laundry in: white, coloured,
synthetics, delicates and wool.
•
Obey the washing instructions that are on the
laundry care labels.
•
Do not wash together white and coloured items.
•
Some coloured items can discolour with the first
wash. We recommend that you wash them
separately for the first times.
•
Button up pillowcases, close zippers, hooks and
poppers. Tie up belts.
•
Empty the pockets and unfold the items.
•
Turn inside out multilayered fabrics, wool and
items with painted illustrations.
•
Remove hard stains.
•
Wash with a special detergent heavy soil stains.
•
Be careful with the curtains. Remove the hooks
or put the curtains in a washing bag or
pillowcase.
•
Do not wash in the appliance laundry without
hems or with cuts. Use a washing bag to wash
12
Summary of Contents for ZWI71209WA
Page 1: ...GETTING STARTED EASY User Manual 1 8VHU 0DQXDO DVKLQJ 0DFKLQH ...
Page 23: ...23 ...
Page 24: ...WWW ZANUSSI COM SHOP ...
