1 “On/Off” button
Press this button to switch the washing machine on.
The display (8) will show three flashing dashes or a
flashing zero. You will find more detailed explanations
on pages 7-8 (see “Display”).
Press the On/Off button again to switch the machine off.
2 “Mains-on” light
This light is connected to the “
On/Off
” button. It lights
up when you press the button, and goes out when you
press it again.
3 “Fabric” button
Press this button repeatedly to select the programme on
the basis of the type of laundry to be washed. The light
relevant to the selected programme will light up. The
washing machine will propose a temperature and
automatically select the maximum spin value provided
for the programme you have chosen. You can change
these values by operating buttons 4 and 5.
Wool and
Handwash
When you select these programmes, you obtain a
particularly delicate wash, suitable for woollens and
articles of clothing whose label indicates that they must
be hand-washed
.
4 “Temperature” button
Press this button repeatedly to increase or decrease the
temperature, if you want your laundry to be washed at a
temperature different from the one proposed by the
washing machine.
6
The Control Panel
1
2
3
4
5
6
7
8
9
10
11
Synthetics
Delicates
Cottons
Wool
60°C
40°C
30°C
Cold
1200
900
700
500
Rinses
Drain
Spin
Wash
Prewash
ZWN
1220 W
Delay
On / Off
Night Cycle
40°
AA
Soak
Fabric
Temperature
Spin Speed
Options
Skip/
Reset
Quick
Extra
95°C
Prewash
Super
Rinse
Start/
Pause
Handwash
The relevant light will light up.
Maximum temperatures are 95°C for cotton, 60°C for
synthetic fabrics, 40°C for delicate fabrics, wool and
fabrics to be hand-washed
(
Wool
and
Handwash
programmes).
5 “Spin Speed” button
Press this button repeatedly to change the spin speed, if
you want your laundry to be spun at a speed different
from the one proposed by the washing machine. The
relevant light will light up.
Maximum speeds are:
• for cotton: 1,400 or 1,200 rpm depending on the
model;
• for synthetic fabrics, wool and fabrics to be hand-
washed: 900 rpm;
• for delicate fabrics: 700 rpm.
• “
Night cycle
” position:
when you choose this option, the machine will not drain
the water of the last rinse, so as not to crease the
laundry.
IMPORTANT!
By pressing the “
Temperature
” and “
Spin Speed
”
buttons simultaneously for about 3 seconds, the
acoustic signal is deactivated at the end of the cycle,
when selecting the programmes and in case of an
incorrect option selection .
By pressing these 2 buttons again the acoustic signal
is reactivated.
ZWN 1220 W
132983440.qxd 18/10/2005 10:11 Pagina 6
