Zanussi ZWN 7100 L, User Manual

• Measure out the

detergent.

• Pour the powder

detergent into the
main wash com-
partment 

 .

• Remove the remaining powder form

the flap.

• There is remaining powder detergent

in the main wash compartment at the
end of a washing programme. Check if
the flap is in the right position.

The flap is up and you wish to use liquid
detergent:

• Turn the flap down.

• Measure out the

detergent.

For the quantity
of detergent, re-

fer always to what is
written on the product
packing and ensure
that the detergent can
be poured in the
drawer.

• Pour the liquid detergent in the compart-

ment 

 without exceeding the limit indica-

ted in the flap.

• Close the dispenser drawer.

Warning!

 Do not use the flap in 

"DOWN"

position with:

• Gelatinous detergent or thick detergent.

• Powder detergent.

• With programmes with prewash.

• Do not use liquid detergent if the washing

programme doesn't start immediately.

In these cases, use the flap in 

"UP"

 position .

Select the required programme by means
of the programme selector dial (1)

Turn the programme selector dial to the re-
quired programme.
The green pilot light of button 

7

 starts to flash.

The selector dial can be turned either clockwise
or anticlockwise.
Turn the selector dial to position 

 to reset the

programme/to switch the machine OFF.

At the end of the programme the selector
dial must be turned to position 

 , to

switch the machine off.

Important!

 If you turn the programme selector

dial to another programme when the machine is
working, the red pilot light of button 

7

 will blink

3 times and the message

Err

 is displayed to

indicate a wrong selection. The machine will not
perform the new selected programme.

Select the spin speed by pressing button 2

When selecting a programme, the appliance
proposes automatically the maximum spin
speed provided for that programme. (See
"Washing programmes" for the maximum al-
lowed spin speed).
Press this button repeatedly to change the spin
speed, if you want your laundry to be spun at a
different speed. The relevant pilot light illumi-
nates.

Select the available options by means of
buttons 3, 4, 5 and 6

Depending on the programme, different options
can be combined. These must be selected after
choosing the desired programme and before
starting the programme. When these buttons
are pressed, the corresponding pilot lights illu-
minate. When they are pressed again, the pilot
lights go out. If an incorrect option is selected,
the integrated 

red

 pilot light of the button 

7

flashes 3 times and the message 

Err

 is dis-

played.
For the compatibility among the washing pro-
grammes and the options see chapter 

«Wash-

ing programmes»

.

10

www.zanussi.com