Zanussi ZWT10710W, User Manual

- staff kitchen areas in shops, offices and other working

environments.

- by clients in hotels, motels, bed & breakfast and other

residential type environments.

- areas for communal use in blocks of flats or in launderettes.

•

The operating water pressure at the water entry point from the

outlet connection must be between 0.3 bar (0.03 MPa) and 8

bar (0.8 MPa).

•

The ventilation opening in the base must not be covered by a

carpet, mat, or any floor covering.

•

The appliance must be connected to the water mains using the

new supplied hose sets, or other new hose sets supplied by

the Authorised Service Centre.

•

Old hose sets must not be reused.

•

If the mains power supply cable is damaged, it must be

replaced by the manufacturer, its Authorised Service Centre or

similarly qualified persons to avoid an electrical hazard.

•

Before any maintenance operation, deactivate the appliance

and disconnect the mains plug from the socket.

•

Do not use high pressure water sprays and/or steam to clean

the appliance.

•

Clean the appliance with a moist cloth. Use only neutral

detergents. Do not use abrasive products, abrasive cleaning

pads, solvents or metal objects.

SAFETY INSTRUCTIONS

INSTALLATION

The installation must comply with

relevant national regulations.

• This washing machine is for indoor use only.

• The appliance is not intended to be used as

built-in

• The openings must not be obstructed by any

means, such like a carpet.

• Washing machine shall not be installed in the

rooms with dangerous materials or caustic

gases.

Remove all packages, transport bolts, motor

protection before using the appliance.

Otherwise, serious damage may result.

• The product with double inlet valves should be

correctly connected to the hot water and cold

water supply. The washing machine with single

inlet valve only have to be connected to the cold

water supply.

• Plug must be accessible after installation.

• Do not climb up and sit on top cover of the

machine.

• Do not lean against machine door.

• Cautions during Handling Machine:

– Transport bolts, motor protection shall be

reinstalled to the machine by a specialized

person "if included".

– The accumulated water shall be drained out

of the machine.

3