background image

18 

 

                                           

  WARRANTY PROOF   

 

LIMITED WARRANTY 
This product is warranted by Pantech International Inc. to be free from defects in 
material and workmanship under normal conditions of use and service in accordance 
with the accompanying user manual. This warranty proof is effective for one calendar 
year from the date of shipment dispatched from Taiwan, except brushless motor and 
ECU which are covered by a 3-year period of time. Pantech International Inc. and its 
authorized dealers are responsible to fulfill obligations of warranty in conformity with 
“ZAPAK PRODUCTS WARRANTY AND AFTER SERVICE BY LAW “ . 
 
This warranty proof is invalid including but not limited to those failures caused by acts 
of god, accidents, misuse, abuse, negligence, improper operation, product modified ,or 
unauthorized service or parts.    This warranty proof is in lieu of all other warranties, 
expressed or implicated including but not limited to the warranties of merchantability 
and fitness for a particular purpose which are hereby excluded. 
 
To obtain services under warranty, you may return the defective tool intact, in person or 
by post with this warranty proof or an invoice of sale, receipt or other dated proof of 
purchase to the dealer whom you purchased from or to the dealer’s authorized service 
center near you.    Please enclose a short description of malfunction with tool when 
returning it by post. 
 
To assure product safety & reliability, service should be performed by your dealer or 
dealer’s authorized service center.    Do not attempt to disassemble & repair the tool by 
yourself.    Violation of this restriction may invalidate this warranty proof. 
 
This warranty proof is granted to the final purchaser only.    This warranty proof is not 
transferable. It is invalid if the serial number is removed or modified or not conformed 
to the product.   
 
This warranty proof gives you specific legal rights which may vary from state to state 
and country to country.    If you have any questions concerning this warranty proof, 
please contact our dealers. 
 
Warranty obligations can be fulfilled provided the following details are filled out fully. 
Otherwise, the purchaser’s invoice or receipt or other equivalent dated proof of 
purchase should be presented. 
 

All wearing parts listed in the user manual and BOSCH battery / charger are not 
covered under warranty.       

 

 

Summary of Contents for ZP-SW25






















Reviews: