Front Panel Connections
1)
RCA Inputs
- Six channels of input are available through RCA connectors*.
2)
RCA Outputs
-4 sets of RCA Connectors provide eight channels of output.
3)
DIP Switch
-Six position DIP switch is used to address the unit and assign a
node on the Zapco Digital Programming Network.
4)
USB Port
- Like all Zapco DC products, the DSP-Z8 has a USB port to interface
with a PC for all DSP programming functions.
5) Auxiliary Input
Digital Input
- Optical connector for SPDIF input
Analog
- RCA connector for analog Aux-in
6)
Data Connectors
- Two RG connectors provide Data in/out for network cables
(and DRC control input)
7)
Power Connector
- Provides Power, Ground, Turn On, and Aux +12 volt out **
* Note:
To use speaker level inputs from a factory stereo, simply attach RCA
connectors to the factory speaker wires(up to a 22v signal). Assure that the DSP or
amplifier is in High Level input mode and plug the speaker wires directly into the RCA
inputs.
you use speaker level inputs from a factory stereo the DC product will turn on
automatically and also p12v trigger output to turn on other components.
** Note:
The Zapco DC Series also has DC-offset sensing for automatic turn-on. If
-10-
5
1
2
3
6
4
7
DSP-Z8 Connection Panel
Summary of Contents for DC-352
Page 7: ......
Page 8: ......
Page 25: ...SPEAKER CONNECTION CLIP SPEAKER DC 501 DC 1101 MONO SUBWOOFER 25...
