Interference
: The Zapco power supplies are high power switching supplies and
as such may cause some interference to TV or radio reception. If you experience
this you should turn the power supply off and move it further away from the
receiving device.
Correct Input Voltage
: Your P100A supply is set for to the proper input voltage
for the country in which it was first sold. If you should move or need it changed
for some other reason, you may contact your Zapco Dealer of Zapco directly
about modifying your unit.
Using Power Supplies with Batteries
The Zapco power supplies can be used in combination with a battery or batteries,
depending on the usage requirements. Batteries should be 12 volt automotive
type. Higher voltage commercial batteries should not be used and will put the
supply into protection. Multiple batteries must be connected in parallel.
For safety, there should be a 100A fuse at the output of the power supply and a
fuse of manufacturer's recommended amperage at the amplifier.
AC Power
Z-PS P100A
FUSE
FUSE
Mode: Master
Battery
Battery
Battery
Amplifier