Using Multiple Power Supplies
Up to four P100A power supplies can be strapped to provide more DC current if
required by the powered device. Each supply will add 100 Amps to the circuit for a
maximum of 400 Amps. The first supply in such a circuit must be set to Master. All
following supplies are set to Slave, then the Master supply's voltage control will set
the voltage for all the supplies.
See above
: Using the supplied connecting cables, the control OUT of #1 goes to
the IN of #2. OUT of #2 goes to IN of #3, etc. Only Supply 1 is in Master mode, all
others are in Slave mode.
Supply 1
Master
Supply 2
Slave
Supply 3
Slave
Supply 4
Slave
AC Power
AC Power
AC Power
AC Power
Amplifier
Mode: Master
Mode: Slave
Mode: Slave
Mode: Slave
Master Out
to Slave In
Master Out
to Slave In
Master Out
to Slave In
400A
FUSE
FUSE
FUSE
FUSE
FU
SE
FU
SE
Battery
