AE0ZP0EC - AC-0 SSL SENSORED - User Manual
Page - 73/100
10.2 Description of console “RESTORE” function
The RESTORE PARAM function allows transfer of the Console’s stored data into
the memory of the chopper. This is achieved in a fast and easy way using the
method previously used with the SAVE PARAM. function.
The data that is available via the RESTORE PARAM. function is as follows:
- All Parameter Values (PARAMETER CHANGE)
- Options (SET OPTIONS)
- The level of the Battery (ADJUST BATTERY).
ATTENTION: When the RESTORE operation is made, all data in the chopper
memory will be written over and replace with data being restored.
Flow Chart showing how to use the RESTORE function of the Digital Console.
Opening Zapi Display
AC0 ZAPI V0.0
24V 150A 00000
Press ENTER to go into the General menu
' % '
' ' '
The Display will show:
MAIN MENU
PARAMETER CHANGE
Press ROLL UP or ROLL DOWN button until SAVE
PARAM. appears on the display
% ' '
% ' '
The Display will show:
MAIN MENU
RESTORE PARAM.
Press ENTER to go into the RESTORE PARAM.
function
' % '
' ' '
The Display shows the type of Model stored, with a
Code Number
SELECT : MOD. 00
AC1 ZAPI V1
Keep pressing either ROLL UP and ROLL DOWN
buttons until the desired model appears on the
Display
% ' '
% ' '
SELECT : MOD. 00
AC1 ZAPI V1
Press ENTER to commence the Restore operation
' % '
' ' '
The Display will ask “ARE YOU SURE?”
ARE YOU SURE?
YES=ENTER NO=OUT
Press ENTER for YES, or OUT for No
' % '
' ' '
' ' '
' % '
You can see the items that are being stored in the
chopper memory whilst the RESTORE routine is
happening
STORING
ACCELER. DELAY
