background image

11  Declaration of conformity

Germany

Product

Type

Machine number

Project number

Trade name

Order

Function

2006/42/EC

DIN EN ISO 12100:2011-03

DIN EN 131-7:2013-09

EN ISO 14122-3:2016

Seite 1/1

Geier Manfred

Leitung R&D

Weilheim, 26.07.2022

Ort, Datum

Unterschrift

Published in L 157/24 of 09.06.2006

Reference to the harmonised standards applied in accorance with Article 7 Paragraph 2:

Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010); 

German version EN ISO 12100:2010
Ladders - Partl 7: Mobile ladders with platform; German version EN 131-7:2013

Safety of machinery - Permanent means of access to machinery - Part 3: stairs, stepladders and guard rails; 

German version (ISO 14122-3:2016)

Plattformtreppe höhenverstellbar

Projekt-Nummer 123

Access and maintenance of machines and industrial equipments.

Height adjustment without opersons on the plattform.

For use only by authorised and instructed personnel.

We eypressly declare, that the machine complies with all relevant provisions of the following EC directives or 

regulations:

Directive 2006/42/EC of the European Parliament and the Council of 17 May on machinery, and amending Directive 

95/16/EC (recast) (1)

Description and identifacation of the machine

Plattformtreppe höhenverstellbar

Industrie

40060041 bis 40060048

PRJ-2022-05-24-0001

Person residing in the Community, who is authorised to compile the technical documentation

Steingruber Jakob
ZARGES GmbH
Zargesstraße 7
D - 82362 Weilheim

Hungary

EC Declaration of Conformity

within the meaning of the EC Machinery Directive 2006/42/EG, Annex II 1. A
Translation

Manufacturer / Production site

Authorised representative / Permit holder

WernerCo Hungary Kft.

ZARGES GmbH

Szent István krt. 19

Zargesstraße 7

H - 6000 Kecskemét

D - 82362 Weilheim

29

Summary of Contents for 40060041































Reviews: