background image

WARNING

Injury to persons
Failure to observe the requirements for safe use of the product may result in serious 

injury.
•  A clearance height of 2,300 mm on the platform to any obstacles on site must be ob-

served.

•  No obstacles may protrude from the machines into the working area of the access 

steps with platform.

•  A minimum passage height of 850 mm must be maintained at narrow points.
•  A clearance of at least 100 mm must be ensured between the handrail/guardrail and 

any obstacles at the place of use.

•  The distance of max. 270 mm between the steps of the entrance and exit surfaces 

must not be exceeded.

•  Push-on guardrails in the direction of the machine may only be removed if the dis-

tance is less than 120 mm.

•  Openings between the floor covering and adjacent components must be made in ac-

cordance with DIN EN ISO 14122-3.

•  The immediate vicinity must be observed during transport by a companion/signaller.
•  No persons are allowed in the danger zone while the work platform is moving.
•  Before initiating a movement, all danger zones must be inspected and checked by the 

operating personnel.

•  No persons may be on or under the platform during the traversing process and height 

adjustment.

•  Before moving and adjusting the height, check that there are no loose parts on the 

platform.

WARNING

Injury to persons
There is a risk of falling if the product is used improperly. This may result in damage to 

property, severe injury and even death.
•  Do not enter the platform before the platform is in front of the machine.
•  Do not step onto the access steps with platform until the locking bolts of the manual 

rack and pinion winch have engaged.

•  Always use the access steps to get onto the product. Climb slowly and without rush-

ing.

•  Never climb onto the railings or jump onto the surfaces.
•  For access steps with platform >45°, climb up and down the stairs facing forwards.
•  Carry loads in such a way that you have one hand free to hold on to the guard rail.
•  The load you are carrying must not obscure your view of the steps.
•  Remove ice, snow and other slippery substances (oil, grease etc.) from the stepping 

surfaces and handrail/guardrail before use.

•  Never move the product while there are people, material or tools on it.
•  If a swing door or pole barrier is fitted, always keep it closed when working on the 

product. Never block the automatic locking device.

15

en

Summary of Contents for 40060041































Reviews: