4.4 Things to do after installation
• After installing the product, check the following:
– Have all parts included in the scope of delivery been fitted?
– Are the wall anchors flush? And is the clearance between the fixed ladder and wall
at least 200 mm at all points? Exception: obstructions that occur only occasionally.
The minimum clearance in this case is 150 mm.
– Are all screwed connections tightened to the correct torque?
– Are all surfaces undamaged? Restore the anti-corrosion protection if surfaces
are damaged.
– Are the rest platforms fully functional?
– Are the doors and rotating platforms functional and is their pivoting range
unobstructed?
– Are appropriate protective measures in place in the area of the descending
emergency exit ladder?
5 Use
5.1 Safety instructions
• Only use the fixed ladder system if it is in technically perfect condition.
• Make sure that no unauthorised persons have access to the fixed ladder system.
• Do not use the fixed ladder system to perform maintenance work if weather conditions
are such that safe access is not possible.
• Ensure free access to the fixed ladder system.
• Do not subject the fixed ladder system to alternating loads, for example by rocking or
jumping on it.
• Close devices such as rotating platforms, rest platforms, security doors and safety
barriers properly after use.
5.2 Special notes
Landing rail
• When exiting the ladder system, keep both hands on the guardrail until you have
reached a safe standing position.
Access aid, retractable
Using the access aid from above:
• Grip the handle and pull out the access aid until the locking bolt on the end of the
tube can be engaged in the recess in the guide. To do this, turn the handle slightly to
the side and press the access aid downwards.
• Check that the access aid is locked in position before entering the fixed ladder system.
The use of an access aid which is not locked in position is prohibited.
• After entering the fixed ladder system, lift the access aid, turn it sideways and lower
it completely.
42
Summary of Contents for 41286
