Security door for escape and maintenance ladders
• After opening, secure the security door against closing unintentionally.
• For security doors on maintenance ladders (item no. 43498): Once you are done
using the fixed ladder system, secure it against unauthorised use by fitting a lock
on the security door.
Security door with fixed side parts
WARNING
Danger of injury caused by obstacles in the pivoting range
• Make sure that there are no persons or objects in the pivoting range of
the security door.
• Open the access protection from the inside with the handbolt.
• After exiting, close the security door.
Platforms (general)
• Do not climb from the platform onto the fixed ladder until you have a secure hold on
the fixed ladder with both hands.
• Do not climb from the fixed ladder onto the platform until you are level with
the platform.
Swing-out access protection
WARNING
Risk of injury when the rotating platform pivots out
• Before triggering the rotating platform, make sure that there are no persons or
objects in the pivoting range of or beneath the rotating platform.
• To trigger the rotating platform, release the locking mechanism from a safe standing
position on the fixed ladder. The rotating platform swings open automatically.
• After opening, secure the rotating platform against closing unintentionally.
6 Inspection and maintenance
6.1 Inspection
• Have the fixed ladders inspected for operational safety by a technical expert at
intervals appropriate for the operating conditions. Inspection must be carried out
at least once a year. The technical expert is authorised to carry out inspection
by the operator and must have taken part in the seminars prescribed by law in
the country concerned.
• Document performance of the inspection, the findings of the inspection and any
measures implemented as a result of the inspection. ZARGES recommends that
you keep an inspection log comprising fixed ladder check sheets, in which all data
concerning the fixed ladder system are entered. Fixed ladder check sheets are
available on the ZARGES home page.
• Once the fixed ladder has been inspected and deemed fit for use, attach the ZARGES
inspection plate (order no. 878384) to the product. The month and year in which
the next inspection is due must be clearly legible.
44
Summary of Contents for 41286
