9
en
4 Markings on the product
Do not remove the safety markings or cover them with
adhesive labels or paint.
Depending on the ladder design, not all of the safety
markings described below will appear on the ladder.
General markings
A
Read the instructions in their entirety. Additional
information on the ladder is available online.
B
Falling from the ladder may cause serious injuries.
C
Never use a damaged ladder. Inspect the ladder for
signs of damage upon delivery and before every use.
D
The maximum load capacity may not be exceeded.
E
Do not use the ladder on an uneven or unstable surface.
F
Avoid leaning out of the product's sides.
G
Only one person may be on the ladder at any time.
H
Always face the ladder when climbing or descending it.
I
Never use the ladder to bridge a gap.
J
The ladder is suitable for both
commercial and household use.
K
Do not set up the ladder on a soiled surface.
L
Ensure you grab on to the ladder securely
when climbing or descending it.
M
Avoid work that involves exerting a lateral
load on the ladder, e.g. drilling into solid
materials to the side of the ladder.
N
While using the ladder, do not carry
heavy or bulky equipment.
O
Wear appropriate shoes while climbing the ladder.
P
Do not use the ladder if you have limited
physical ability. Be aware of your health and
physical condition. Consumption of medications,
alcohol or drugs is detrimental to safety.
Q
Identify all risks posed by electrical equipment in
the working area, e.g. high-voltage power lines
or other exposed electrical equipment. Do not
use the ladder if there are electrical risks.
Product-specific markings
R
Do not use the ladder as a means of crossing over to
another surface.
S
Do not use the ladder when it is folded.
T
Only use the ladder when both ladder sections are fully
secured against splaying.
U
Do not step on the marked surface.
V
Only use the ladder with rigid spreaders that have been
locked.
5 Assembly
Installing compatible accessories (not included in the
scope of delivery)
See II
6 Setup and use
In commercial use, it is recommended to perform an inspection
and record it using an inspection plate before using the product
for the first time (see “Periodic inspections” on page 10).
Setting up the ladder
Folding up the ladder
See II
7 Maintenance and servicing
To ensure safety when using the ladder, we recommend
using only original spare parts. Using spare parts from other
manufacturers that do not meet the required specifications
may void the warranty.
Care and maintenance of the ladder are meant to ensure its
proper functioning. The ladder has to be regularly inspected
for signs of damage. It is necessary to ensure that moving
parts are functioning properly.
Repair work on the ladder has to be carried out
by a competent person and in accordance with the
manufacturer's instructions.
Cleaning
The ladder should be cleaned immediately after use if it is
visibly soiled. This applies especially to all its moving parts.
The product can be cleaned using water and a little
conventional cleaning agent.
Cleaning agents must not be allowed to seep into the soil.
• Dispose of used cleaning solutions in accordance with the
relevant environmental regulations.
Summary of Contents for ZAP Safemaster S
