zarges ZAP Z600, Instructions For Assembly And Use

2

1. Information on this manual

1.1 General notes

These instructions are valid for the following products:

The instructions in this manual must be read, understood and complied with to en-
sure correct and safe erection and operation of the product. Failure to comply with 
these instructions may lead to fatal accidents, injury or damage to property.

This manual must be kept at the place of assembly and operation and must be avail-
able to personnel at all times. It must be read, understood and complied with by all 
personnel carrying out any of the following tasks:

• transportation

• assembly and dismantling

• use

• inspection, cleaning, servicing or maintenance

This manual must be handed over to the new owner if the product is passed on to 
others. 

In addition to this manual, the following documents and regulations must be 
observed:

• the country-specific accident-prevention regulations

• the recognised special procedures for correct and safe use of scaffolding

• safety regulations for the use of electrical equipment where there is increased

risk

1.2 Explanation of 

symbols

The following symbols and terms are used in this manual:

D

ANGER

This symbol and the word "Danger" draw attention to imminent danger to the health 
and safety of personnel. Disregarding these warnings will result in serious or fatal 
injury.

W

ARNING

This symbol and the word "Warning" draw attention to possibly hazardous situations 
endangering the health and safety of personnel. Disregarding these warnings may 
lead to injury or even fatal injury.

Where the exact source of the danger can be localised, the following symbols are 
used together with the signal words listed above:

This symbol appears next to activities where there is a danger of serious or fatal in-
jury as a result of electric shocks.

ZAP telescopic platform ladder