2. KEY TO MACHINE PARTS (Page 2)
3. USAGE
4. SWITCHING ON
5. CLEANING
A/B/C/D/E
A/B/C/D/E
A/B/C/D/E
A/B/C/D/E
A/B/C/D/E
B/C/D/E
A/B/C/D/E
E
A
1
5
7
2
6
3
4
- Concentrator;
- Cool switch;
- Heater switch;
- Speed switch;
- End cap (removable on B/C/D/E models);
- On/Off switch button;
- Hanging loop;
- No diffuser, no ionic;
- With diffuser and ionic;
Clip the concentrator (or the diffuser, for B/C/D/E models only) onto the front of the
hairdryer (if required).
The ionization function is activated automatically when the dryer is started (only
on B/C/D/E models). Negative ions reduce heat damage to hair, as well as static
electricity accumulated during drying.
- Unwind the power cable and plug into the mains socket and switch on.
- Set the On/Off switch to the required settings (1 or 2).
- Select the desired temperature and speed from the respective buttons.
- The button adjusts the cool air speed and the button controls temperature
and speed.
- When you have finished, set the On/Off switch to the off (0) position.
- Do not use liquid or aerosol cleaners.
- Clean your appliance with a soft, damp (not wet) cloth.
Important: Before you do any of the following, make sure the hairdryer is
unplugged from the mains supply.
4
3
4
E2
E3
