2. KEY TO MACHINE PARTS (Page 2)
A
A
A
A
A
A
A
B
B
B
B
B
A
A
B
B
A
1
5
2
6
3
7
9
2
5
3
7
6
4
8
1
4
10
- Mixing container lid;
- Function switch (round) with the switch positions:
EXT
(“Extruding”);
MIX
(“Mix”=Mixing/kneading)
- Motor unit;
- Mixing container;
- Kneading spiral and dough screw conveyor with drive shaft
(inside the mixing container);
- Pasta attachment (inside the locking ring);
- Connecting piece;
- Attachement for fettuccine;
- Attachement for Oriental noodles / Asian noodles;
- Attachement for linguine;
- Attachement for capellini (angel hair);
- Attachement for tagliatelle;
- On/Off switch (square) with the switch positions:
EXT
(“Extruding”);
OFF
(“Off”);
MIX
(“Mix”=Mixing/kneading)
- Locking ring;
- Attachement for spaghetti;
- Attachment for rigatoni;
- Locking clip of the mixing container lid;
4
• Always check the device for damage before putting it into operation. If the device, cable or
plug shows visible signs of damage, the device must not be used until the damage has been
repaired. Do not use the device if it has malfunctioned or been dropped. In such cases, get the
device checked out by an authorised specialist.
• Do not insert any foreign bodies through into the housing, the slots or in the mixing container
in order to prevent damage to the device. Do not introduce any objects into the ventilation slots
of the device and make sure that no objects block the ventilation slots.
• Keep hair, body parts, jewellery and clothing away from rotating parts of the device in order to
prevent injuries.
• The device should be used only when it is fully assembled. Always make sure that the lid is
placed on correctly as the device will only work properly when the mixing container lid is placed
on correctly.
• Only use accessories which are recommended by the manufacturer in order to prevent damage
to the device.
• Never leave the device unsupervised during operation.
• Do not drop the device or allow it to be knocked violently.
• In the event of damage/faults, switch the device off immediately.
• Always unplug the appliance before disassembled, assembled or cleaning.
• Always pull the plug and never the cable.
