3. ASSEMBLY
5
English
• Always assemble the device in full before you connect it to the mains power.
1. Place the mixing container on the motor unit.
2. Push the dough screw conveyor into the connecting piece.
3. Push the kneading spiral onto the drive shaft of the dough screw
conveyor.
The kneading spiral can only be pushed onto the drive shaft if the
feather key in the opening of the kneading spiral extends into the
groove on the drive shaft.
4. Now push the drive shaft of the dough screw conveyor with
the kneading spiral through the round dough outlet opening in the
mixing container.
5. Insert the drive shaft into the pentagonal opening of the motor
unit.
6. Push the connecting piece up to the limit stop into the round
dough outlet opening of the mixing container. On the connecting
piece there is a circular mark (shown in black on the picture). Make
sure when inserting the connecting piece that the circular mark on
the connecting piece is opposite the circular mark on the mixing
container.
IMPORTANT: BEFORE INITIAL USE!
Before you can use the device, you must:
• unpack the items supplied
• clean the device and accessories
UNPACKING
• Keep children and animals away from the packaging material. There is a danger of suffocation!
• Unpack all parts and check the items supplied (see the “Items Supplied” chapter).
• There may still be some production residues on the device. To avoid harmful effects to your
health, clean the device and all accessories thoroughly before using them for the first time
(see the “Cleaning and Storage” chapter).
